PSB-4X96W-UNI-24VDC 4X96 Watt 24 Volt DC Power Supply
Accepts input voltage in a range of 120 - 277VAC and outputs 24VDC power up to 4x96 watts. Can be used as a dimmable or non-dim Power Supply. Dims down 7% with an ELV dimmer or a 0-10 volt dimmer when two additional wires are connected to the dimmer. Power Supply features short circuit and overload and over temperature protection. Indoor applications only. UL, CUL, RoHS, CE, Title 24 Compliant, AAA Rating, FCC Class B Compliant, IP67
Applications: Indoor*
*To avoid overheating the power supply, install it in a ventilated remote location where air flows.
Maintain proper spacing among power supplies when multiple power supplies are installed
in the same remote location.
Mounting:
Surface mounted with conduit access
Power Input:
120-277 volts AC, 50/60Hz
Power Output:
Class 2; 24 volts DC 2x4A, 4x96 watts maximum
Efficiency:
>84%
Power Factor:
>0.90
Dimensions:
17" x 13" x 3"
Ambient Operating Temperature:
-25C to 40C
ELV Dimmer Type:
Legrand: Adorne ADTP703TU
Lutron: Diva DVELV-300P, Skylark SELV-300P, Maestro MAELV-600 and Radio
RA 2 RRD-6NA
0-10 Dimmer Type:
Lutron: Radio RA2 (with GRX-TVI), Grafik Eye Qs (with GRX-TVI), Diva (with
PP20); Nova T
Philips: Sunrise SR1200ZTUNV
Leviton: IP710-DL
Legrand: ADPD4FBL3P2W4
Not compatible with Warm Dim (27D, 30D)
Ordering Code
| Product | Wattage | Dimming | Voltage | Option | ||||
| PSB | - | 4X96W | - | UNI | - | 24VDC | - | Standard (Leave Blank) |
| PSB Power Supply with Enclosure Box |
4x96W 4x96 Watt | UNI Universal Dimming | 24VDC 24 Volt DC | IW In-Wall Kit |
Triac Dimmer : (Forward Phase) Typically used for the dimming of Incandescent and Low Voltage Magnetic Transformers
ELV Dimmer : (Reverse Phase) Dimming of Electronic Low Voltage Transformers and Power Supply’s used for LED lighting
0-10 Dimmer : Dims the Low Voltage side of a 0-10 volt power supply commonly used in large scale lighting or commercial applications.
The Uni-Power Supply is NOT compatible with Pure Edge Warm Dim Soft Strip. Please use Pure Edge 0-10 Volt or Pure Edge ELV power supplies
for that application.
The Uni-Power Supply is recommended with any Siemens/Murray brand of arc fault breaker to overcome the issues with tripping the breakers
with an ELV LED Low Voltage Drivers.
