PSB-2X100W-ELV-24VDC Power Supply
- Specification Sheet (.pdf)
- Installation Instructions (.pdf)
- Installation Instructions - In Wall Kit (.pdf)
Accepts input voltage of 120VAC and outputs 24VDC power up to 2x96 watts.
Can be used as a dimmable or non-dim Power Supply*. In-Wall Power Supply
Kit includes Power Supply, box cover and stud hangers for installing Junction
Box in wall. Power Supply features short circuit and overload protection. Indoor
applications only.
*Electrical Panels using Seimens/Murray AFCI breakers are not compatible with this ELV transformer. Use
0-10 Volt power supplies with this breaker.
**ELV power supplies are not compatible with nLight, use only 0-10 volt or Uni driver power supplies
Applications:
Indoor*
*To avoid overheating the power supply, install it in a ventilated remote location
where air flows. Maintain proper spacing among power supplies when multiple power
supplies are installed in the same remote location.
Power Input:
120 volts AC, 50/60Hz
Power Output:
Class 2; 24 Volts DC 2 x 4A, 2x96 watts maximum
Dimensions:
PSB-2X100-ELV-24VDC: 12.15" x 6.48" x 2.18"
PSB-2X100-ELV-24VDC-IW: 14" x 8.5" x 2.18"
Dimmer Type
Legrand: Adorne ADTP703TU; Lutron: Diva DVELV-300P, Skylark SELV-300P,
Maestro MAELV-600 and Radio RA 2
|
2X96W, 24VDC LOW VOLTAGE WIRE SIZE CHART: 3% VOLTAGE DROP | ||||
| WIRE LENGTH (FT) | UP TO 33' | 34'–52' | 53'–86' | 87'–130' |
| WIRE SIZE | 14 AWG | 12 AWG | 10 AWG | 8 AWG |
| VOLTAGE AT END OF WIRE | 23.28VDC | 23.29VDC | 23.28VDC | 23.28VDC |
Ordering Code
| Product | Wattage | Dimming | Voltage | Options | ||||
| PSB | - | 2X100W | - | ELV | - | 24VDC | - | Standard (Leave Blank) |
| PSB Power Supply with Enclosure Box |
2X100W 2x96 Watts | ELV Electronic Low Voltage |
24VDC 24 Volt DC | IW In-Wall Kit |
