300W/24V Magnetic Remote Mount Transformer


300 watt remote mount magnetic transformer converts line voltage input to low voltage 24 volt output for powering Monorail, Cable Lite or Fast Jack low voltage lighting system. Power feed or power feed canopy required, sold separately. Protected by fast acting secondary circuit breaker. 24 volt lamp must be used.

The remote mount transformer must be installed in an accessible location (such as an attic or in a closet). To prevent voltage drop it is best to keep transformer within 20 ft of power canopy/junction box. The electrician must supply the correct gauge wire from the transformer to the power feed/junction box location based on the length of conductor. See Low Voltage Wire Size Chart.

A 600 watt magnetic low voltage dimmer must be used when dimming is desired. The dimmer is powered on the line voltage side of the transformer. Some buzzing may occur on low levels and may be reduced with a dimming de-buzzing coil (TDB-300), sold separately.

9.02 lb (4.09 kg)

Compatible Power Feed Canopies:
View spec sheet for complete list



Ordering Code

T - 300 - 24 - Standard 120V
(leave blank)
T Remote Transformer   300 300 Watt   24 24 Volt   2 230V 50Hz
3 277V 60Hz
P Plug-In