600 watt remote magnetic transformer converts two line voltage inputs to two low voltage 12 volt, 300 watt outputs for powering a Monorail 2 Circuit system. Power feed or power feed canopy required, sold separately. Protected by fast acting secondary circuit breaker.
Installation:
The remote transformer must be installed in an accessible
location (such as an attic or in a closet). To prevent
voltage drop it is best to keep transformer within 20 ft
of power canopy/junction box. The electrician must
supply the correct gauge wire from the transformer to
the power feed/junction box location based on the length
of conductor.
Dimming:
Two 450 watt magnetic low-voltage dimmers must be used
when dimming is desired. The dimmer is powered on
the line voltage side of the transformer. Some buzzing may
occur on low levels and may be reduced with two
dimming de-buzzing coils (#TDB-300), sold separately.
System not dimmable only when one circuit uses halogen
fixtures and the other circuit uses LED fixtures. All other
combinations are dimmable.
Weight:
24.20 lb (10.97 kg)
Ordering Code
T | - | 2X300 | - | 12 | - | Standard 120V (leave blank) |
T Remote Transformer | 2X300 600 Watt | 12 12 Volt | 2 230V 50Hz 3 277V 60Hz P Plug-In |