Start the ordering process by selecting the desired length and lens option. Then order the LED Soft Strip, End Caps, Power Feed Joiner, and Jumper. At 0.61 inches tall the channel is low profile, made of aluminum with 3 finish options, and fits a 24VDC LED Soft Strip inside. The channel and lens may be cut in the field, and may be joined together using the Light Channel Snap & Light Solderless Jumper/Power Connector. Mounting Clips are included with every 2 feet of channel, and also be ordered separately as replacement parts. The Clear Lens provides maximum light levels and will show LED dots. The Diffuser Lens projects clean lines of light, eliminating LED dots. Both the Clear and Diffuser Lens are Gel Color Filter Suitable allowing for color personalization. Zircon LED Gel filters are recommended and can be purchased from the dealer www.leefilters.com. Gel filter life is 5,000 hours before needing to be changed.
End Caps are sold in pairs and provide a finished look at the end of a run as well as hold the required power connector. Typically one order of End Caps per run will suffice, however additional End Caps may be required if the lighting design requires cutting the channel.
Use as a power connector is required, and use as a jumper connector is optional. Join 2 cut sections of LED Soft Strip end to end within the channel. Solderless connections provide easy installation and are compatible with Solderless Light Channel Connector accessories. To use as a power connector cut and strip the wires.
Joins 2 sections of LED Soft Strip in the channel. Used when replacing a section of LED Soft Strip.
Conducts power to 2 sections of LED Soft Strip within the Light Channel. Requires Light Channel Solderless Snap & Light Power/Jumper Connector (sold separately) for use.
Conducts power to 3 sections of LED Soft Strip within the Light Channel. Requires Light Channel Solderless Snap & Light Power/Jumper Connector (sold separately) for use.
Conducts power to 4 sections of LED Soft Strip within the Light Channel. Requires Light Channel Solderless Snap & Light Power/Jumper Connector (sold separately) for use.
Light Channel comes with standard mounting clips. LCMW.6-MCL mounting clips are provided with every 2 feet of Light Channel.
Use for remote located power supply. The 3 inch rectangle or 4 inch round white canopy covers the electrical box and feeds wires for Light Channel. The Splice Box provides a safe enclosure for low voltage connections.
Consumes 2.3 watts per foot (SS2P) and 3.5 watts per foot (SS4P) is available in two color temperatures. SS2P and SS4P Soft Strip use ELV and 0-10V power supplies.
Consumes 2.5 watts per foot (SS2C), 4.4 watts per foot (SS5C), and 7.3 watts per foot (SS7C) and is available in six color temperatures. SS2C, SS5C, and SS7C Soft Strips use ELV and 0-10V power supplies.
Consumes 4.8 watts per foot and is available in two color temperatures that dim down to 2200K. SS5C Soft Strip Warm Dim uses ELV power supplies.
Consumes 4.8 watts per foot and provides variable color temperatures ranging from candlelight (2000K) to cool white (4000K). SS5C Soft Strip Tunable White uses ELV, 0-10V, and DMX power supplies.
Consumes 5 watts per foot and provides dynamic color changing effects with red, green, and blue LEDs. SS5 Soft Strip uses DMX power supplies.
Consumes 4.8 watts per foot and provides static colors with red, green, blue, and amber LEDs. SS5 Soft Strip uses ELV and 0-10V power supplies.