Lazer Strip COB™ Snap and Light Static White & Color, 3W, 5W 24VDC

Tweet

Additional Photos:

• Specification Sheet (.pdf)
• Installation Instructions (.pdf)

  Lazer Strip COB Static White & Color, 3W, 5W 24VDC Price List
  List Price Configurator

Features and Benefits

• 148 LEDs per foot provide uniform light distribution without dots and low glare
• Snap & Light Solderless Connectors reduce labor during installation
• Gold Plated Contacts prevent oxidation to ensure longevity of LEDs
• 3 oz of copper with 12 mm wide board provides better heat dissipation and less voltage drop
• 24VDC LED Lazer Strip offers 4 static white color temperatures all with high CRI
• Amber, Red, Blue, and Green options available
• Solid State Power Supply offers 85-90% efficiency compared to magnetic at 80%.
• 50-watt power supply fits into J-Box (PS-60L-ELV-24VDC)

Specifications

• 24VDC LED Lazer Strip with 120° beam angle
• Available in 3.3 or 4.4 watts
• May be field-cut in 2.4" increments
• Sold in 1' long increments
• Class 2 Damp Listing; 100 watt limit per power supply

Applications

• Indoor, damp, or dry locations
• Place on ceiling or wall
• Coves, toe-kicks, under cabinets and shelves, bookcases, drawers, pathways, accent lighting, task lighting, and general illumination

Lamp Data

• Average life is 50,000 hours
• Operating temperature: -22°F to 140°F (-30°C to 60°C)
• Includes a 5-year pro-rated warranty

Included Components

• LS3 or LS5 24VDC LED Lazer Strip
• 3M™ Adhesive Tape Backing

Accessories (Sold Separately)

• 24VDC Solderless Snap & Light Jumper Connector
• Flexible Connectors
• Mounting Straps & Clips

Remote Power Supplies*, Dimmers & Controls (Sold Separately)

• UNI Driver: Universal Dimming (TRIAC, ELV, 0-10V) with corresponding dimmer
• 0-10 Volt Dimming (0-10V)
• DMX - Color Changing
• Lutron Hi-Lume®
*In-Wall Mounting Kits available for select power supplies
**Tunable White Requires two dimmers (one for each color temperature) or use our proprietary Tunable White Controller CDMX-1
†With nLight Dimming Do Not use ELV power supplies, use only 0-10 volt or Uni drivers power supplies

Mounting

• Industrial 3M tape lines back of strip for self-adhesion to most smooth finished surfaces
• Additional Snap & Light Solderless Connectors, Mounting Straps, and Clips may be needed for some applications (sold separately)

Ordering Code