• PRODUCTS
• APPLICATIONS
• WHERE TO BUY
• ABOUT PURE

• Round edge 1.3
• Round edge 2.0
• Round Beveled 2.0
• Round edge 3.3
• Square edge 1.3
• Square edge 2.0
• Square Beveled 2.0
• Square edge 3.3
• Round edge 3.3 RGB
• Square edge 3.3 RGB
• Lens Accessories

• Genna Wall Wash 3.3

• Stratus Wall Grazer

• Aurora Accent - PDF

• ZIP File
• PDF

Additional Photos:

  

• Specification Sheet (.pdf)

Specification grade recessed plaster-in (drywall) flangeless, flush wall wash fixture. Trim offers no-glare aperture and ultra uniform field of light to top of wall. Mounts at 32" (813mm) center to center and 40" (1016mm) from center to wall.

1. Lamp:
MR16 12v 50W IR Lamp (infrared, equal to 75W Halogen), maximum.

2. Housing:
GH6 IC and air tight construction, 19 gage die formed aluminum. Suitable for remodel and new construction.

3. Plaster Plate:
1/8" (3mm) thick aluminum plaster plate, primed and mounted flush with ceiling. Durabond® ceiling compound is applied at the outside of the 12" (305mm) X 9 1/4" (235mm) X 1/8" (3mm) housing avoiding chipping and cracking at the trim aperture.

4. Mounting:
Self leveling telescoping mounting bars extend to allow mounting between studs 16-24" (406-609mm) O.C. mounting hardware is suitable for new and remodel commercial or residential drywall construction. Designed to accommodate ceiling thickness from 1/2" (13mm) to 1 1/4"(32mm). Notch marking for laser alignment.

5. Trim:
Die-cast and precision-machined aluminum 3.5-inch (89mm) aperture. Flangeless, flush square trim with precision snap-fit into the plaster plate.

6. Reflector:
Precision cut aluminum with silver haze, brushed bronze, white or black finish.

6. Reflector:
Supplied with frosted prismatic lens to provide smooth beam patterns.

8. Electrical:
Standard 75W 120V 60Hz torroidal magnetic transformer includes integral thermal protection and potting for noise reduction. Spring clip allows transformer to be easily removed or interchanged to electronic through the aperture. Primary leads 120V (Special order: 277V, 230V 50Hz or electronic). Secondary output voltage: 11.8V. Socket pure nickel contacts.

Dimmer Type:
Dimmer must be compatible with low-voltage magnetic transformers except for special order selection.

Label:
UL, C-UL and CE listed for dry or wet location with wet location lens accessory #LWET.

Accessories:
Louvers, lenses and additional parts, see accessories page.

Genna Ordering Code for Complete Fixture: